GapSquare drive245switch leverLocking ScrewPinLight shock2037620106426Locking Screw75TMN・TM・TMNH・TMNSH・TMNSWH・TD・TMNR・TMWM・TMNWＴ２ＭＮ６How to use[Examples of torque setting using T4MN100]Setting completedAccurate torque setting with Visible indicatorTorque setting knob(Patent and design are already registered.)Original design, patent acquired !Visible Indicator● Preset type torque wrench● When preset torque has been reached, a click sound will occur with slight force from the wrench● Preventing from wrong torque setting with visible indicator1. Insert square drive securely to the socket.Color Classication of Sq.dr2. Conrm switch lever is located on the right as below.3. Set up the targeted torque value.●Turn locking screw to the left (counter-clockwise) to loosen. The screw will not be able to move further when it hits the pin.●Turn Torque Setting Knob to set target torque value. The digits in the window indicate setting torque.●Setting up torque at 62N・m starting from actual reading of min. 20N・m. Turn Torque Setting Knob to the clockwise direction.●Setting up torque at 62N・m starting from actual reading of min. 20N・m. Turn Torque Setting Knob to the counter - clockwise direction.●Turn locking screw to the right to lock. Now, the setting is completed.4. Apply socket to cover bolt/nut completely.5. Apply the middle nger above loading point on the wrench, grip handle and pull to clockwise direction.Color Classication of Sq.drProduct6. When preset torque has been reached, a click sound will occur with slight force from the wrench. At this point, please stop tightening to avoid overtorque.20Torque setting knobIncreaseClockwiseCounter ClockDecreaseLoading Point6.35 mm1/49.5 mm3/812.7mm1/219.0mm3/4InterchangeableTypeHow to use videohttps://youtu.be/nMxEO0ZiBbE452
元のページ ../index.html#454