602759165200802924104040084025010028901460Table(It's possible to remove.)Load cradle x axis strokeCH1：Square Drive 12.7ｍｍCH2：Square Drive 25.4ｍｍCH3：Square Drive 38.1ｍｍRemote control boxCaster φ100 x 6 pcs. Curly cord Max 2mTORQUE WRENCH TESTING MACHINEAutomatic torque wrench testing machine. Easy setting, easy operation.(Conforming to JIS B 4652 : Requirements and test method of manual torque tool)ModelsCHTorque Range(N･m)Increment(N･m)Square Drive(mm)Method for measurementAccuracy(%)Weight(kg)ATT210011〜 500.00112.7CWCCW±1750220〜 5000.0125.43200〜21000.138.1Used in TONE FactoryPass/fail check screenComputer with connection cable9.5 mm3/812.7mm1/219.0mm3/425.4mm16.35 mm1/4●Voltage : three-phase 200V, 30A●Operating Temperature : 18℃-28℃●Operating Humidity : 50% RH ± 20%Accessory○Table○Oset Reaction Bar○Hex socket head cap screw M12×35 (6pcs)○Computer with connection cable (software is installed)○LCD monitor, mouse, keyboard○Cable 9pin (4m)○Square Drive adapter for measurement channel (1 pc./unit) ＣＨ１：concave6.35ｍｍ×convex12.7ｍｍ, concave9.5ｍｍ×convex12.7ｍｍＣＨ２：concave9.5ｍｍ×convex25.4ｍｍ, concave12.7ｍｍ×convex25.4ｍｍ,concave19.05ｍｍ×convex25.4ｍｍＣＨ３：concave19.05ｍｍ×convex38.1ｍｍ, concave25.4ｍｍ×convex38.1ｍｍ○Instruction Manual / Calibration Certicate W/H Traceability*Printer is not mountedAutomatic measurement & testing systemHigh Accuracy and DurabilityHigh Accuracy : Wide RangeCustomization (with service charge)●Registration available (Model, accuracy, loaded location)●Automatic testing according to torque model●Measurement data can be stored in PC●Calibration certificate issuable (printer needed)●Up to 8 measurement points can be set.●The number of measurements at each measurement point up to 50 times.* *Calibration Certificate shows up to 10 times in one mesurement point.●Accuracy : ±1% ●Torque range：1 - 2100 N・m●Customization is available to customer's needs, such as change in specification.Calibration Certicate IncludedTest ReportTraceability Chart469
元のページ ../index.html#471